INSTALLATION
MOUNTING:
1. The Securview™ SV-6704.IR Rear Vision System uses a wide-angle lens for best all around
performance. The Camera will display the full width of most parking spaces up to 7 feet or
even wider.
2. The SV-6704.IR is designed to be flush mounted on vehicle’s surface. It can be mounted
anywhere on the vehicle that has a flat surface. Make sure to double check behind the
surface of where you will be mounting the camera to make sure that there is adequate space
for the camera to be placed in the decided location.
3. Use the provided Hole Saw bit to drill the hole in the location you have chosen for mounting
the camera. (
WARNING
: When drilling the hole, be careful not to use excessive force when
pushing on the drill as the bit may break through the surface quickly and puncture anything
behind it resulting in damage to any modules or OEM parts behind the mounting location)
4. Once the hole has been drilled, route the RCA and Power cables through the hole and snap
the camera into place. The steel lock tabs will hold the camera tight to the mounting surface.
SIDE VIEW
Fastening Ring
CAMERA INSTALLATION
Use the Provided Hole Saw
Bit to Drill the Hole for the Camera
Camera
Lens
Cable
Mounting
Surface
CAMERA:
1. The color CMOS camera is maintenance-free, waterproof (IP-68) and vibration resistant.
2. This camera is designed to work well in day time or night time conditions.
3. The camera is completely electronic. There are NO manual adjustments for focus, etc.
