SecurityMan CARCAMGPS, Руководство пользователя

Страница: 9 / 38

5
Quick Start Guide
HARDWARE SETUP & INSTALLATION
The following will guide you through a quick setup process and a couple setting changes that
will need to be configured before using your camera.
IMPORTANT
• Always keep your eyes on the road and never take both hands off the steering wheel when
using the hand-gesture feature.
• After the initial setup, mobile devices will auto connect to the camera (when in range)
whenever the camera is on. You will still need to open the app to sync events at the end of your
commute.
• Due to cell phone hardware limitations, Android users may not be able use other apps or
sync maps and GPS data while connected to the camera.
• There are several “audible alerts” built into the camera which can be used to assure your
camera is working as advertised:
Please insert a memory card – Make sure you are using a memory card no bigger than
64GB and that its pushed in all the way.
Memory card error, please re-format –
Bad/corrupt memory card. Re-format it at once.
GPS is connected – If you do not hear the GPS is connected prompt during boot up.
Please reposition the GPS dongle on your windshield.
INSERTING YOUR MEMORY CARD
Insert your memory card (64 GB max) into the Memory card slot until it locks/clicks into place.
Make sure that you insert the memory card with the teeth facing towards the camera’s micro
USB power port as shown in the images below.
NOTE:
Please refrain from inserting the memory card backwards or upside down. Doing so
may cause the port to become damaged and inoperable. SD card not included.