34
check and/or reset the settings. This will not erase any presets
which were stored in the camera. Use the DOWN button to select
RESET MENU SETUP. Press OPEN to initialize the reset
procedure. The OSD will prompt that the operation is proceeding
and when it is complete.
11.2 FACTORY DEFAULT SET
This function resets all values of all menus to the factory original
settings AS WELL as erase all presets and tour settings which
were stored in the camera. This is useful if the camera is doing
something unusual and it would be too difficult to go through all
pages of the menus to check and/or reset the settings. Use the
DOWN button to select FACTORY DEFAULT SET. Press OPEN
to initialize the reset procedure. The OSD will prompt that the
operation is proceeding and when it is complete.
SET PRESET POINT NUMBERS
Preset #
Function
1 ~ 32
Set preset points 1 through 32
CALL PRESET POINT NUMBERS
1 ~ 32
Go to Preset Points 1 through 32
CLEAR PRESET POINT NUMBERS
1 ~ 32
Clear preset points 1 through 32
