20
set and press the
‘right’ key to enter the edit screen.
2: Use the up and down keys to adjust the present value, and press the right key to enter and
move to the next adjustment. The item being changed will blink. When it blinks, operate the
right key again to exit the editing the schedule.
3: Select the next schedule and repeat the operations above.
4: When setting the status, press the left key to exit setting. When selecting the status, press
left key to return to the previous page.
Remark:
When the schedule is set, there cannot be any overlap in the time periods. The
system will respond with priority to the first triggered schedule, only after which is completed, it
will respond other schedules. Please make sure there is only
one schedule at each specific period. System will return to
preset 1 after completing the schedule.
4.7 Language
LANGUAGE: Language has English, Spanish, French, Germany, Italian, Polish and
Portuguese, Russian etc. selectable.
4.8 Reset
RESET CAMERA: This is used to initialize the camera back to
the factory default settings This applies to the camera module
only, not to presets, tours etc..
DEFAULT: This is used to initialize the system settings, including
the camera settings, but it will not delete all the information in
memory.
FACTORY DEFAULT: This is used to initialize all of the settings
of the system and camera. All the information in memory will be deleted, such as presets,
patterns, etc. Please use this carefully. This operation will take a minute or more to finish.
Please wait patiently.
CALIBRATION: Execute this function to make the motor of the dome to reset in a fixed time to
prevent locate inaccurately caused by external operation. Default set is OFF, the function has
1-59 days and OFF selectable.
<LANGUAGE>
LANGUAGE ENGLISH
EXIT
<RESET>
RESET CAMERA
DEFAULT
FACTORY DEFAULT
CALIBRATION OFF
EXIT
