ST-POE24M
Hardware Installation Manual
- 1 -
Chapter 1
ST-POE24M
Switch
This document describes the characteristics and parameters of the
ST
-POE24M
and gives an overview of
ST
-POE24M physical interfaces.
1.1 Standard Configuration
The accessory ports of the
ST
-POE24M is composed of 24 fast-Ethernet ports,
four 1000M optical/electrical ports and one console port. See table 1-1.
Table 1-1 Attributes of the necessary port
Port
Attribute
fast-Ethernet POE port
An port, which has a 10/100M auto-adaptation,
MDI/MDIX
auto-identification
for
cable,
UTP(RJ45) port and the LINK/ACT 100Mbps
indicators. Each fast-Ethernet port has the POE
function. Each port can provide the outside up to
30W power consumption and the total power
consumption reaches 400W.
1000M optical/electrical port
Electrical port: 10/100/1000M auto-adaptation,
MDI/MDIX auto-identification of cable, UTP(RJ45)
port and the LINK/ACT indicators
SFP port: having LINK/ACT indicators
Console port
An RJ45 port with a rate of 9600 bps
Additionally,
ST
-POE24M has a grounding column, a socket and a power switch at
its rear panel.
Figure 1-1 Front template of the
ST-POE24M
switch
Table 1-2 Parts at the front template of the
ST-POE24M
switch
No.
Abbrev.
Name
Description
1
PWR
Power indicator
If the switch is powered on, the indicator
is on.
2
SYS
System indicator
If the indicator is always on, the system
is being started.
