v1.0 10/14/10
4
3. HARDWARE CONNECTIONS
The unit should be installed within 6 feet of the AC power outlet and on a surface capable of
supporting the device’s 2.8 lbs weight. Objects are not to be placed on the device and there
must be sufficient space and ventilation for proper heat dissipation.
Rear Panel Description
The rear panel consists of a 48V DC power jack and 5 RJ-45 ports. Use of power adaptors or
power supplies other than that included with the device may damage the unit and void the
warranty.
Port 1X – A standard 10/100Mbps Ethernet port supporting 10Mbps Ethernet or
100Mbps Fast Ethernet. The port runs in both half and full duplex modes using two
pair of CAT 5/5e cable.
Ports 2X through Port 5X – These ports support 10/100Mbps Ethernet in addition to
802.3af Power over Ethernet. All PoE ports will automatically activate when a
compatible terminal is connected. The device will supply power through the Ethernet
port to the connected PoE Device (PD). The unit also supports legacy devices
allowing users to mix legacy and PoE compatible equipment on the same network.
All ports are Auto-MDI. As the device can auto negotiate to MDII or MDI-X, the CAT
cable can be connected regardless of whether it is a standard or crossover cable.
LED Indicator
The LEDs provide instant status feedback and provides assistance when troubleshooting is
required.
