v1.0 10/14/10
3
SPECIFICATIONS
ST-POE-S04-60W
Specifications (Typical)
1. Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3af Power Over Ethernet
2. Protocol
CSMA/CD
3. Data Transfer Rate
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
4. Network Cables
10BASE-T: 2-pair UTP CAT 3, 4, 5 up to 328 feet
100BASE-Tx: 2-pair UTP CAT 5, 5e up to 328 feet
5. Number of Ports
4x10/100Mbps auto-MDIX RJ-45 ports with PoE enabled ports.
5x10/100Mbps auto-MDIX RF-45 ports
6. PoE Power on RF-45
Power +: ping 3 and ping 6; Power -: ping 1 and ping 2
7. AC to DC Power Adaptor
Input 110V~240VAC, 50Hz ~ 60Hz. Output 48VDC @ 1.25A
8. Power Consumption
3.2 watts (max with no PD device connected)
60 watts (max with a 56W PD device connected)
9. Humidity
Relative humidity 5% - 95%
10. EMI
FCC Class B, CE Mark Class B
11. Safety
110VAC to 48VDC power adaptor UL listed
12. RAM Buffer
64K bytes per device
13. Filtering Address Table
1K entries per device
14. Packet Filtering/Forwarding Rate 10Mbps Ethernet: 14,880/pps; 10Mbps Ethernet: 148,800/pps
15. MAC Address Learning
Automatic Update
16. Transmission Method
Store-and-Forward
17. Dimensions
4.4”W x 3.3”D x 1”H
18. Operating Temperature
32
°
F ~ 104
°
F
INSTALLATION AND OPERATION
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or Securitytronix in the USA at
1-610-429-1511 for assistance.
