background image

SECURITYTRONIX 2-Year Limited Fixed Camera Warranty

Securitytronix. (the "Company") warrants to the Original Purchaser that the Fixed Camera is free from 

defects in workmanship or material under normal use. This warranty starts on the date of shipment 

of the hardware to the Original Purchaser.

During the warranty period, the Company agrees to repair or replace, at its sole option, without 

charge to Original Purchaser, any defective component in the Fixed Camera. To obtain service, the 

Original Purchaser must return the Fixed Camera to the Company properly packaged for shipping. All 

defective products must be returned to the Company within thirty (30) days of failure. Products must 

be returned with a description of the failure and Return Merchandise Authorization (RMA) number 

supplied by the Company. To receive a RMA number and a return shipping address on where to 

deliver the hardware, call 610-429-1821. The shipping, and insurance charges incurred in shipping to 

the Company will be paid by Original Purchaser, and all risk for the hardware shall remain with the 

Original Purchaser until such time as Company takes receipt of the hardware. Upon receipt, the 

Company will promptly repair or replace the defective unit, and then return said unit to Original 

Purchaser, shipping prepaid. The Company may use reconditioned or like-new parts or units, at its 

sole option, when repairing any hardware. Repaired products shall carry the same amount of 

outstanding warranty as from original purchase. Any claim under the warranty must include dated 

proof of purchase or invoice. In any event, the Company's liability for defective hardware is limited to 

repairing or replacing the hardware.

This warranty is contingent upon proper use of the hardware by Original Purchaser and does not 

cover: if damage is due to Acts of God (including fire, flood, earthquake, storm, hurricane or other 

natural disaster), accident, unusual physical, electrical, or electromechanical stress, modifications, 

neglect; misuse, operation with media not approved by the Company, tampering with or altering of 

the hardware, war, invasion, act of foreign enemies, hostilities (regardless of whether war is 

declared), civil war, rebellion, revolution, insurrection, military or usurped power or confiscation, 

terrorist activities, nationalization, government sanction, blockage, embargo, labor dispute, strike, 

lockout or interruption or failure of electricity, air conditioning, or humidity control, internet, 

network,  or telephone service

The warranties given herein, together with any implied warranties covering the hardware, including 

any warranties of merchantability or fitness for a particular purpose, are limited in duration to two 

years from the date of shipment to the Original Purchaser. Jurisdictions vary with regard to the 

enforceability of warranty limitations, and you should check the laws of your local jurisdiction to find 

out whether the above limitation applies to you.

The Company shall not be liable to your for loss of data, loss of profits, lost savings, special, 

incidental, consequential, indirect, or other similar damages arising from breach of warranty, breach 

of contract, negligence, or other legal action even if the Company or its agent has been advised of the 

possibility of such damages, or for any claim brought against your by another party. Jurisdictions vary 

with regard to the enforceability of provisions excluding or limiting liability for incidental or 

consequential damages. You should check the laws of your local jurisdiction to find out whether the 

above exclusion applies to you.

This warranty allocates risks of product failure between Original Purchaser and the Company. The 

Company's hardware pricing reflects this allocation of risk and the limitations of liability contained in 

this warranty. The warranty set forth above is in lieu of all other express warranties, whether oral or 

written. The agents, employees, distributors, and dealers of the Company are not authorized to make 

modification to this warranty, or additional warranties binding on the Company. Accordingly, 

additional statements such as dealer advertising or presentations, whether oral or written, do not 

constitute warranties by the Company and should not be relied upon.

This warranty gives you specific legal rights. You may also have other rights which vary from one 

jurisdiction to another.

Содержание ST-IP2VFB

































Отзывы: