Security Tronix ST-IP2VFB, Быстрый старт

Страница: 22 / 32

ST-IP2VFB QUICK START GUIDE
21
21
Steps:
1. Disassemble the camera. Refer to section 2.1.
2. View the camera image using the monitor.
3. Loosen the zoom lever and move the lever between T(Tele) and
W(Wide) to obtain the appropriate angle of view.
4. Tighten the zoom lever.
5. Loosen the focus lever and move the screw between F(Far) and
N(Near) to obtain the optimum focus.
6. Tighten the focus lever.
7. Assemble the camera. Refer to section 2.1.
Figure 2-9 Zoom and Focus Adjustment
Zoom/Focus Lever