Template
Cable
Hole
Screw
Hole
Side Opening
Figure 2-1
Drill Template
Note:
Drill the cable hol
e if planning to route the cable
through the ceiling/wall.
3.
Attach the bracket to the ceiling/wall and secure the
camera with
the
supplied screws.
Fixing Screw
Adjusting Screws
Figure 2-2
Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and
plastic anchors
.
For cement wall/ceiling,
plastic anchors
are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
4.
Route the cables through the cable hole, or the side
opening.
5.
Connect the corresponding power cord, and video
cable.
6.
Power on the camera to
adjust the viewing angle
(aim). A
djust the camera
as needed
according to the
figure below to get an optimum angle.
P Screw
T Screw
R Screw
Tilt Position
[0° to 180°]
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Figure 2-3
3-axis Adjustment
1).
Loosen the P screw to adjust the pan position [0°
to 360°]. Tighten the screw after completing the
adjustment.
2).
Loosen the T screw to adjust the tilt position [0°
to 180°]. Tighten the screw after completing the
adjustment.
3).
Loosen the R screw and rotate the camera [0° to
360°]. Tighten the screw after completing the
adjustment.
