JPEG2000 DVR User Guide
-44-
4-5-2 USB BACKUP
1.[HDD]
Indicates the start and the end recording date and time of the HDD(s).
2.[USB]
Select a starting date and time for backup. Press ENTER and use arrows to move the cursor. Use [+] [-] or the
Jog Shuttle to change the value. Press ENTER and then press down arrow to go to SIZE to choose a backup
size.
Unit supports USB Thumb Drives and USB Hard Drives. A USB Hard Drive must be partitioned by a PC before
use in FAT32 format with each partition not exceeding 31Gb.
3.[SIZE]
Insert a blank DVD+R or CDR disk and the DVR will check the disk size and display it on the screen. Press
ENTER to enter the SIZE selection. Use [+] [-] or the Jog Shuttle to change the value. Press ENTER and the
DVR calculates the end date and time for backup automatically.
4.[BACKUP]
Move the cursor to BACKUP and press ENTER to start the backup. System will save the file in
AJP
format.
Users have to install the program of BACKUP PLAYER to play the backup file. Please refer to CHAP.5 Back-up
for more details.
4-6 External device
1.[TCP/IP SETUP]
Set up the DVR’s TCP/IP information.
2.[RS232C SETUP]
Set up the parameters of the RS232 port.
3.[PANTILT SETUP]
Set up the parameters of the PTZ control.
4.[AUDIO SETUP]
Audio record and play
