Security Command 670 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

Security Command 670 Скачать руководство пользователя страница 4

2

Special SECURITY COMMAND Messages

ENTER CODE:-

This message will be displayed when the SECURITY

SECURITY

SECURITY

SECURITY

SECURITY

COMMAND

COMMAND

COMMAND

COMMAND

COMMAND is requesting a code number. Code numbers are needed for arming,
disarming, and many of the various system options. When you press the
SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMAND keys to enter your code number the numbers you enter will
not be displayed. Instead a * will be displayed for each digit. This is to keep other
people from seeing your code number when you enter it. Always press COMMAND
after you complete the entry of your code number.

TRY AGAIN

This message is displayed when a code number is

entered the first time which does not exist in the alarm system memory.

INVALID CODE

This message is displayed when a code number is

entered a second time which does not exist in the alarm system memory.

INVALID LEVEL

This message may be displayed when trying to access

one of the Menu Options. When a code number is entered which is in the alarm
system memory, but is not a high enough level to access a particular Menu Option,
this message will be displayed.

INVALID TIME

This message is displayed when a level 1 or 2 code

number is entered outside permanent or temporary schedules. Level 1 or 2 codes
will function only during a permanent or temporary schedule.

This message is displayed when there is an electronic

failure in your alarm system. You should contact your alarm dealer if this message
is ever displayed.

Special SECURITY COMMAND Tones

Keystroke tone:

Keystroke tone:

Keystroke tone:

Keystroke tone:

Keystroke tone: Short beep. This short beep is emitted each time a key is pressed
on the SECURITY COMMAND.

Prewarn tone:

Prewarn tone:

Prewarn tone:

Prewarn tone:

Prewarn tone: Pulsed tone, one second on, one second off, continuous. This tone
is emitted after an entry delay door is opened to remind you to disarm your burglary
system.

Monitor tone:

Monitor tone:

Monitor tone:

Monitor tone:

Monitor tone: Pulsed tone, one second on then off, one pulse only. This tone is
emitted when using the loop monitor option. The tone will be emitted every time
the loop is displayed in the alert condition.

Trouble tone:

Trouble tone:

Trouble tone:

Trouble tone:

Trouble tone: Steady tone, always on. When using the Status Display option this
tone will be emitted for any fire or system trouble until the tone is acknowledged by
pressing any top row select key on the SECURITY COMMAND.

SERVICE REQUIRED

«
...
2
3
4
5
6
...
»

Содержание 670

































Отзывы:

Нет отзывов