Security Command 670, Руководство пользователя, Страница: 13 / 32

11
Step By Step: Step By Step: Step By Step: Step By Step: Step By Step:
1. Press the key until PERIM ALL PERIM ALL PERIM ALL PERIM ALL PERIM ALL is displayed.
PERIM
2. Press to arm areas.
ALL
Press
to arm areas.
3. Enter your code number if required.
4. Loops which have been bypassed prior to arming and 24 hour loops which
are in a bad condition will be displayed. No action is required by you.
5. Bypass any bad loops if required (step 5a, 5b, 5c).
5a. If a problem exists on one or more loops the loop name and problem will
be displayed and followed by BYPASS? NO YES
BYPASS? NO YES BYPASS? NO YES BYPASS? NO YES BYPASS? NO YES .
NO
5b. Select
to stop the arming sequence without bypassing
any loops. Correct the problem and return to step 1.
YES
Select to bypass all non-24 hour loops displayed as bad.
5c. Enter your code number if required to bypass loops.
6. The display will read SYSTEM ON SYSTEM ON SYSTEM ON SYSTEM ON SYSTEM ON if only the perimeter is armed,
and ALL SYSTEM ON ALL SYSTEM ON ALL SYSTEM ON ALL SYSTEM ON ALL SYSTEM ON if both the perimeter and interior are armed.
7. The exit time will be displayed in seconds and begin counting down,
EXIT DELAY: XX EXIT DELAY: XX EXIT DELAY: XX EXIT DELAY: XX EXIT DELAY: XX . When the delay expires the exit loops will be
armed.
INSTNT
8. Press while the exit delay is displayed to immediately
arm all exit loops and make them instant.
ALL/PERIMETER ARMING
COMMAND