31
Figure 2-17
The rear panel of the 32-8P series is shown as below. See Figure 2-18.
Figure 2-18
Please refer to the following sheet for detailed information.
Port Name
Connection Function
USB2.0 port.
Connect to USB2.0 mouse.
Network port
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
R
S232(RS-422) 232
debug
COM.
It is for general COM debug to configure IP
address or transfer transparent COM data.
HDMI
High
Definition
Media
Interface
High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA
VGA video
output port
VGA
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
1-16
Alarm
input
port.
z
There are four groups. The first group is
from port 1 to port 4, the second group
is from port 5 to port 8, the third group is
from 9 to 12, and the fourth group is
from 13 to 16. They are to receive the
signal from the external alarm source.
There are two types; NO (normal
open)/NC (normal close).
z
When your alarm input device is using
external power, please make sure the
device and the NVR have the same
ground.
Alarm input
port ground
end
I/O port
Alarm input ground end.
Содержание NVR-ELT-4-POE4 4ch series
Страница 101: ...92 Figure 5 55 Figure 5 56 Figure 5 57...
Страница 125: ...116 Figure 5 100...
Страница 159: ...150 signal which meets the senility standard that is previously set See Figure 7 42...
Страница 192: ...183 Teclast Ti Cool 512M Teclast Ti Cool 1G Teclast Ti Cool 2G...
