Mechanical Digital Locks
11 of 11
The code I programmed on my SBL700 does not work.
After having entered your correct code and turning the snake
eye of the cam from the 12 to 3 o’clock position did you press
‘C’ before inputting your new code?
If no your new code is now a combination of both your old and
new code. For example if you entered 1234 then turned the
cam and then entered 4567 and rotated the cam back. Your
code would now be 1234567 as you did not clear the old code
from the unit’s memory before having entered the new code.
If you now input the accidentally programmed code it should
work. Repeat the code change process using your accidentally
programmed code remembering to press ‘C’ before inputting
your new code.
Remove the unit from the door and look at the reverse of the
Digital Keypad Side. You will notice numbers corresponding
with the buttons on the front of the unit. Next to each number
there is a hole. If you press ‘C’ then look in each one, those
holes which have a red marking in will be your programmed
code.
Unit 6, The Cedar Business Centre, Cannock, Staffordshire, WS11 1QJ
Tel: +44 (0) 1543 501600
Fax: +44 (0) 1543 501601
Email: [email protected]
www.securefast.co.uk
