Secure SSR 302, Руководство пользователя и инструкция по установке, Страница: 8 / 16

8
Adding to a 3rd Party Controller
To add the unit to a 3rd party controller follow these
steps, also known as
‘inclusion’ in Z-Wave terminology.

Ensure the LED is flashing RED on the SSR 302, if
not follow the steps in
‘Remove from a network’ first.

Put the 3rd party controller into inclusion mode.

Press and hold both white buttons on the SSR 302
until the LED starts flashing green.

The SSR 302 has been added onto the network and
the LED will go solid amber.
NOTE: If the LED does not flash green, the add process
has been unsuccessful.
Removing from a Network
To remove from a Z-Wave network, follow the steps
below, also known as
‘exclusion’ in Z-Wave
terminology.

Put the 3rd party controller into exclusion mode.

Press and hold the two white buttons on the SSR 302.

The SSR 302 has been removed from the network
when the LED starts flashing red.
NOTE: If the Network LED does not flash, the remove
process has been unsuccessful.