Secure Computing SSL Scanner, Руководство пользователя

Страница: 191 / 191

SSL Scanner
A list entry consists of the following fields:
•
Host
- URL that caused the incident.
Incidents can be added to the certificate lists either
by host
or
by certifi-
cate
, as is shown in the fields used for configuring the policy-dependent
and independent certificate lists. If
by host
was selected, the input shown
here under
Host
becomes available.
A wildcard may be used to include a range of URLs, e. g.
*.webwasher.com
.
•
C (short for Common Name)
- If an incident was caused by a Common
Name mismatch, it is indicated here by a red lamp symbol. Otherwise there
will be a green lamp symbol.
•
E (short for Expired)
- If a certificate has expired, this incident is indicated
here by a red lamp symbol.
•
S (short for Self-signed)
- If an incident was caused by a self-signed
certificate, it is indicated here by a red lamp symbol.
•
R (short for Root Certificate Authority)
- If an incident was caused
by a failure during validation of the root certificate authority, it is indicated
here.
•
Policy
- Policy belonging to the certificate list this incident is going to be
added to.
•
Action
- Action configured for the policy and host/certificate that will apply
when the incident is added to a certificate list.
The list is sortable by
Host
and the
C(ommon Name)
,
E(xpired)
,
S(elf-
signed)
and
R(oot Certificate Authority)
failure attributes.
Note:
An incident that occurred for two or more different reasons, cannot be
added
by certificate
.
Whenever a certificate is added this way, errors that were caused by the cer-
tificate are ignored. Different reasons may occur, however, when a certificate
is inspected with regard to different policies.
If errors cannot be determined unambiguously, as is the case when there are
two or more reasons for an incident, the
by certificate
method cannot be
applied. Incidents can then only be added
by host
.
You can select several incidents from the list and add or delete them in one go
by clicking on the
Add
or the
Delete
button. If you wish to process an entry
separately, use the
Add
and
Delete
buttons in the same line.
If an incident was deleted from the list, it will not be ignored in the future, but
be generated again should it occur.
4–31