“Speed size”It is used to set the rotation range. The larger the number, the larger the amplitude.
The setting range is 1 ~ 8 and the default is 5.
“Preset point”:Add,delete and invoke preset points:
Preset point adding: Fill in the preset point number in the preset point number box, rotate the
pan/tilt to the orientation where you need to add the preset point through the pan/tilt direction control
button, and then click the add preset point button to complete the preset.
Preset point deleting: Fill in the preset point number in the preset number frame, and click the
delete preset button to complete the deletion of the preset point;
Preset point invoking: Fill in the preset point number to be invoked in the preset point number
box, and click the start button to invoke the preset point.
“Zoom”: Adjust the camera lens multiplier with the -/+ button, which requires the camera lens to
support zooming;
“Hide”: After clicking, the current interface will be temporarily hidden;
“Control arrow key”: Control the pan/tilt rotation to support 8 directions control (the front panel
only supports 4 directions);
“High-speed PTZ”: After selection, the full-screen display of the channel surface, press the left
mouse button at different positions of the preview screen, you can control the pan/tilt to rotate in
different directions; hold down the left mouse button and turn the mouse wheel to control Camera lens
zooming;
“Advanced”:
Enter the advanced PTZ setting interface, which can perform inter-point tour,