Sectron GSM Key LITE 3, Инструкция по эксплуатации

Страница: 19 / 39

19
ADMINISTRATION BY WEB INTERFACE
CONNECTING AND ADMINISTRATION OF GSM KEY PROFI 3
The device connects to a pc or to an active element by an ethernet cable.
If the
GSM Key PROFI 3 is connected directly to a PC, it is necessary to change the IPv4 address in control
panels to 192.168.0.1. The device will be then available on the IP adress 192.168.0.22 .
Detailed description of the configuration can be found in the section Network card settings – p. 36
If you connect
GSM Key PROFI 3 to an existing network, it will be assigned an ip address from the
corresponding network.
For the access to the web interface, enter
gsmkey/ into the address bar in your internet browser.
Default username is “ administrator” the password is blank.
SAVING CONFIGURATION CHANGES
Any configuration change of the key needs to be saved. This can be done by clicking the icon of a floppy disk
at the bottom part of the window. The current logged in user will be automatically signed out affter 10
minutes of inactivity.
DELETING CONFIGURATION CHANGES
Deleting configuration of the key can be done by using the button situated next to the charging input. You
can do so by pressing the button and then connecting the charger.
After holding the button for 10s, parameters
“ Settings ” and “ Communication” (indicated by flickering red
diode with frequency of 5Hz).
After holding the button for 30s, the entire memory of the key gets deleted (indicated by the flickering diode
with frequency of 0,3Hz).