Sector Alarm TC, Руководство пользователя

Страница: 9 / 16

Activating using the remote control
Keep in mind that the remote control activates the system instantly. You should therefore be
careful not to activate the alarm until you are outside of the protected zone.
Full Arm mode (activates the entire alarm system)
Close all of the exterior doors and windows before activating the system.
Press the button Activating Full Arm mode .
The button confirmation light will light up for a few seconds to confirm activation. In the case of
a system error, you will need to rectify the error and then try to activate the system again.
Part Arm mode (activates part of the alarm system*)
Close all of the exterior doors and windows before activating the system.
Press the button Activating Part Arm mode.
The button confirmation light will light up for a few seconds to confirm activation. In the case of
a system error, you will need to rectify the error and then try to activate the system again.
Check status
To check the status of the system you press the status button with question mark and
the button of the current panel status will light for a few seconds.
* Part Arm mode is programmed according to your needs. The Sector Alarm Security Advisor will
program the alarm according to your preferences.
Panic Alarm function
Activating Full Arm mode
Deactivation button
Activating Part Arm mode
Status button
HOW TO USE THE ALARM SYSTEM 9