Sector Alarm TC, Руководство пользователя

Страница: 10 / 16

SECTOR ALARM – DOMONIAL USER INSTRUCTIONS 4
Deactivating using the keypad
Deactivate
The entire system will be deactivated, regardless as to whether it was in Full Arm mode or
Part Arm mode .
Enter your personal code or use the keytag.
The system light 1 will switch off.
When somebody enters the property, the system will generate a sound to indicate that
it is necessary to deactivate the alarm system.
Deactivating using the remote control
Deactivate
The entire system will be deactivated, regardless as to whether it was in Full Arm mode or
Part Arm mode.
Press the button Deactivation .
The LED confirmation light will light up for a few seconds to confirm the command.
When somebody enters the property, the system will generate a sound to indicate that it is
necessary to deactivate the alarm system.
Siren and sound
When an alarm is triggered the siren will sound. The sound will be generated from the smoke
detectors and indoor sirens if fitted.
You will have two different sounds depending on the type of alarm.
If the sound is constant, there has been a burglar alarm or a panic alarm
If the sound is pulsing, the system has detected smoke - - - - - - -
10 HOW TO USE THE ALARM SYSTEM