SYS-B68-IGW
Information subject to change. Please visit
to find the latest version of this manual.
Page.7 of 16
3.2
Software Specifications
BIOS
B6I FLASH
software version released on the website
, which is always updated and available, even in later versions.
3.3
Reference directives
SECO S.p.A.
places the device on the market, equipping and providing it with:
-
CE marking
-
Declaration of Conformity
-
FCC - Part 15 Certification
*
-
ISED Certification
**
* (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
** This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
