SYS-B68-IGW
Information subject to change. Please visit
to find the latest version of this manual.
Page.16 of 16
o
internal diameter 4.3mm
o
external diameter 16mm
o
width 1.6mm
o
compliant with ISO 7089
in points
(A)
, indicated in the figure;
3
Proceed to connect the electric supply to the device. Once inserted, turn the
connector clockwise in order to lock it in place;
4
Proceed to electrically connect the destination machine.
To install the device properly on
metal sheet/part/wall
, follow the procedure below:
1
Make sure the electric connection on the destination machine is off and the electric
power supply is disconnected from the device;
2
Proceed to fasten the device to the wall, using:
screws
o
type: M4
flat washer
o
internal diameter 8.4mm
in points
(A)
, indicated in the figure;
3
Proceed to connect the electric supply to the device. Once inserted, turn the
connector clockwise in order to lock it in place;
4
Proceed to electrically connect the destination machine.
