Seco SX-600, Руководство пользователя, Страница: 34 / 79

34
4.4 Log Search Menu
The Log Search menu provides a way to audit the use of the DVR. You can see who logs in
and when, what actions they take, and any alarm events recorded on the DVR (such as
motion). You can even backup the log search that you perform.
4.4.1 Searching the System Log
At the top right you can select the type of logged event you would like to search for. By
clicking the calendar icon to the right of
Start
and
End
Time, and then adjusting the time below
the calendar you can select a date and time period to search for logged events.
When you click the “search” button, the DVR will list all recorded events that occurred
between your “start” and “end” times, and match the “event type” you selected. It will display
the results of the search in the result list to the left of the search criteria. If you have a lot of
search results it may stretch across multiple pages, with 10 results listed per page. You can use
the “Next” and “Prev” buttons to navigate to the next or previous page, or you can use the
“First” and “Last” buttons to navigate to the first or last page of the search results. You can also
click the “Clear” button to clear all the results from the Result List.
If the event is an alarm event with recording, you can click the
playback symbol
in the
playback column
to play the recorded video. You can also backup the system log, simply click
the
Backup
button after you have performed a search to back up the system log. Make sure
your USB drive (or a blank CDR/DVDR is inserted in the DVDRW drive if supported by your
model) is inserted into the USB port on the unit before clicking the
Backup
button.
***NOTE: Your USB Drive must be formatted in FAT32 or NTSC, and can be up to 16GB***