2.2
Technical Specifications
Processors
Intel
®
Atom X Series, Intel
®
Celeron
®
J / N Series and Intel
®
Pentium
®
N Series
(formerly code name Apollo Lake) Processors:
-
Intel
®
Atom x5-E3930 Dual Core @1.3 GHz (Burst 1.8GHz), 2MB L2 Cache, 6.5W TDP
-
Intel
®
Atom x5-E3940 Quad Core @1.6 GHz (Burst 1.8GHz), 2MB L2 Cache, 9.5W TDP
-
Intel
®
Atom x7-E3950 Quad Core @1.6 GHz (Burst 2.0GHz), 2MB L2 Cache, 12W TDP
-
Intel
®
Pentium
®
N4200 Quad Core @1.1GHz (Burst 2.5GHz), 2MB L2 Cache, 6W TDP
-
Intel
®
Celeron
®
N3350 Dual Core @1.1GHz (Burst 2.4GHz), 2MB L2 Cache, 6W TDP
-
Intel
®
Celeron
®
J3455, Quad Core @1.5GHz (Burst 2.3GHz), 2MB L2Cache, 10W TDP
-
Intel
®
Celeron
®
J3355, Dual Core @2.0GHz (Burst 2.5GHz), 2MB L2Cache, 10W TDP
Memory
Single-/Dual-/Quad- Channel Soldered Down LPDDR4-2400 memory, up to 8GB
Graphics
Integrated Intel
®
HD Graphics 500 series controller with up to 18 Execution Units
Three Independent displays supported
HW decoding of HEVC (H.265), H.264, MVC, VP8, VP9, MPEG2, VC-1, WMV9,
JPEG/MJPEG formats
HW encoding of HEVC (H.265), H.264, MVC, VP8, VP9 and JPEG/MPEG format
Video Interfaces
eDP interface or Dual Channel 18/24bit LVDS interface
HDMI or DP++ interface
DP++ interface
2 x CSI interfaces
Video Resolution
HDMI, eDP, resolution up to 3840x2160 (4K) @ 60Hz
DP++, resolution up to 4096x2160 @ 60Hz
LVDS, resolution up to 1920x1200 @ 60Hz
Mass Storage
Optional eMMC 5.0 drive soldered on-board
1 x external S-ATA Gen3 Channel
SD interface
PCI Express
4 x PCI-e Root Ports
Networking
Up to 2 x Gigabit Ethernet interfaces
Intel
®
I210 or I211 Controller (MAC + PHY)
USB
6 x USB 2.0 Host Ports
2 x USB 3.0 Host Ports
Audio
HD Audio interface
I2S Audio interface
Serial ports
2x 2-wire HS-UARTs
2x 4-wire UARTs
Other Interfaces
Up to 14 x GPI/Os
I2C Bus
SM Bus
2x SPI interfaces
FAN Management
Optional TPM 1.2 / 2.0
Power Management Signals
Power supply voltage:
+5V
DC
and +3.3V_RTC
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version -40°C ÷ +85°C **.
Dimensions:
50 x82 mm (1.97
”
x 3.23
”
)
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 5.1
