SBC-C57
SBC-C57 User Manual - Rev. First Edition: 1.0 - Author: S.O. - Reviewed by R.Z. - Copyright © 2021 SECO S.p.A.
24
3.3.2
On board WiFi + BT modules
The SBC-C57 board can be equipped with a Dual band (2.4GHz + 5.0 GHz) WLAN 802.11 ac/a/b/g/n + BT 5.0 embedded module, which is an AzureWave Type
NGFF, p/n AW-CM276NF.
This optional WiFi + BT module mounts two U.FL connectors for external antennas, where BT signal is shared with WiFi signal on the Aux antenna connector.
3.3.3
Audio Interfaces
SBC-C57 mounts on-board a Texas Instrument TLV320 I2S Stereo Audio
Codec, for high quality audio implementation.
To give the maximum flexibility to SBC-C57 board, it is available a dedicated 8-
pin 2.54mm pitch Pin header, type Molex p/n 53398-0871, for external
connection of a Line Out output and two Mic In inputs.
Mating connector: MOLEX 51021-0800 receptacle with MOLEX 50079-8000 female crimp
terminals.
In order to reduce the space dedicated to connectors, there is a TRRS Combo
Audio Socket CN4, i.e. a single socket which offer both stereo Line Out and
Mic In functionalities.
Such TRRS Combo Audio socket can be used with any 4-poles 3.5mm diameter audio jack, with
pinout compatible with the most recent Headsets, shown in the table on the left.
Audio Internal Header CN5
Pin Signal
Pin Signal
1
Mic_In2_L
5
GND
2
Mic_In2_R
6
Line_Out_L_
3
Mic_In1_L
7
Line_Out_R
4
Mic_In1_R
8
GND
TRSS Audio Jack CN4
Pin
Signal
TIP
Headphone Out Left Channel
RING1
Headphone Out Right Channel
RING2
GND
SLEEVE
Mic In
