Seco i-PAN T10 Baseboard, Руководство пользователя

Страница: 8 / 20

Version 2.0 i-PAN T10 Baseboard 8 of 20
J302: iMod UART connector
The iMod UART connector is a standard connector defined by SECO to allow customers to
easily add functions to a baseboard.
SECO offers different extension boards ranging from a simple breakout board to
RS232/RS485/RS422 transceiver boards.
Customers may design their own peripherals which can be connected through a 10pol FFC
cable.
Pin Signal Function
1 UART1_RI RI input
2 UART1_DCD DCD input
3 UART1_DSR DSR input
4 GND Power
5 +3V3 Power
6 UART1_RTS RTS output
7 UART1_CTS CTS input
8 UART1_TXD TXD output
9 UART1_RXD RXD input
10 UART1_DTR DTR output
Connector: 687110149022 by Wuerth
This connector uses UART1 (COM1:) of the Trizeps-module.
Besides using it as normal serial-port, it can additional be configured to give debug-output of the
operating system or to enter the bootloader of the Trizeps on startup.
Most signal pins of a Trizeps can be configured as GPIOs. Some or even all UART-pins of this
connector could be used as GPIOs.