ENFORCER Heavy-Duty Outdoor Stand-Alone Keypad
SECO-LARM U.S.A., Inc 9
SECO-LARM U.S.A., Inc.
33
9
O
U
TPU
T 2
4-Digit
code length
(Default)
12~24
VAC/VDC
Power
Supply
N.C.
N.C.
1.
If an incorrect code is entered 3 times in a row, the keypad will lock down.
2.
To use the keypad again wait 55 seconds or disconnect and reconnect the power.
3.
To avoid lockout, wait 5 seconds after entering an incorrect code. The keypad will give 3
short beeps. It is now safe to enter another code without being locked out.
Wrong Code Lockout:
Changing Code Length:
1.
Disconnect power to the keypad.
2.
To make the code length 5 digits, place the PIN3 jumper on pins 1 and 2.
3.
To make the code length 4 digits, place the PIN3 jumper on pins 2 and 3 (default).
4.
Reconnect power to the keypad.
5.
Keypad will beep 22 times, then return to standby mode.
Note:
This will delete all previous codes, including the master code. All
other programming will remain.
For N.C. locking devices:
Connect output 2 in series with the locking device
For N.O. locking devices:
Connect output 2 in series with the locking device
Wiring – Door Hold Open Code:
Tamper N.C.
Door Sensing
Wiring – Auxiliary Accessories:
Relay Output #2 – Example, to shunt
an alarm N.C. zone
Restoring Keypad to Factory Default (see pg. 11):
1.
Pull the PIN2 jumper from pins 1 and 2 (default).
2.
Place the PIN2 jumper on pins 2 and 3. Wait for the keypad to beep 26 times.
3.
Pull the jumper and place on pins 1 and 2. The keypad is now ready to be
reprogrammed using the programming instructions on page 10.
Note:
This resets the keypad to factory default settings. All user codes
are deleted and the master code is
1234
or
12345
(see above).
To the protection zone of
an alarm control panel
Keypad will
beep 26 times
Alarm
Control Panel
Magnetic
Door Contact
(N.C.)
Magnetic
Door Contact
(N.C.)
O
U
TPU
T
1
O
U
TPU
T
2
N.O.
COM
N.C.
N.O.
COM
O
U
TPU
T
1
O
U
TPU
T
2
N.O.
COM
N.C.
N.O.
COM
N.C.
Tamper
REED
COM (-)
N.O.
COM
N.C.
Electromagnetic
Lock
Electromagnetic
Lock
12~24
VAC/VDC
Power
Supply
5-Digit
code length
1
2
3
5 digits
4 digits
S.R.
(System restore)
JUMPER
1
2
3
5 digits
4 digits
1
2
3
S.R.
(System restore)
JUMPER
S.R.
(System restore)
JUMPER
1
2
3
1
2
3
