Seccua UrSpring, Инструкция по установке и эксплуатации

Страница: 43 / 108

103 Filter module should be changed
soon. Prepare the replacement of the filter module.
104 The last flush cleaning did not
raise the perf
rr o ff rmance of the filter
above the set threshold value fo ff r
cleaning.
At the Flush if fo ff uled setting ( Automatic flush
when fouled
​
):
1. Set the threshold value to >60%.
2. Set the minimum time two automatic
flushes to 20 minutes.
The UrSpring should now incrementally regain
its perf
rr o ff rmance in the course of the next few
days. If the perf rr o ff rmance is not increased aft ff er a
few days, change the filter module and consider
a more regular flushing (as described in the
steps above).
105 Problem with power supply. Check the power supply and socket.
106 Ambient temperature above 40°C
(104°F). Lower the ambient temperature.
107 Ambient temperature below 0°C
(32°F). Make sure the water does not freeze. The
electronic control will work below 0°C.
109 Pressure sensors are not
functioning correctly. Calibrate pressure sensor (see 4.2.1 Calibrating
the pressure sensors ​ )
If the error remains, replace the sensors ( 4.2.2
Exchanging the pressure sensors ​ ) or contact
your serv rr ice technician.
111
112
113 Time setting was lost or could not
be saved. Make sure the power supply works and reset the
time (
Set the correct time
​
).
115 Memory error. It might be that the power supply of the UrSpring
was lost fo
ff r a longer time, make sure the power
supply and socket work correctly.
Contact your serv
rr ice technician.
Page 43/50