Secap SI1000, Руководство оператора

Страница: 25 / 49

25
SI1000 Operator Guide (SV62138 Rev. A)
Model Required: Your SI1000 must have an
optional Sheet Feeder A2.
Notes: This job uses the second sheet
feeder A2 in 2nd Page mode to feed two-
sheet collated sets. Load sheets into the
feeder in collated sequence: fi rst page,
second page, fi rst page, second page and
so on.
Step Action Tips For More Details…
1 Make sure that paper Choose 11” or 14” Page 32
size setting is correct
2 Load sheets into Load face down Page 12
Sheet Feeder A2. and bottom edge
See note above for fi rst
loading sequence
3 Press button to select Make sure BOTH Page 8, 9
Feeder A2 and green indicators
2nd Page are lit
4 Press button to Make sure green Page 8, 9
select Fold Only indicator lights
5 Press Trial Piece button Check trial piece Page 8, 9
and check trial piece for a good fold
6 Press Start button Stop button will stop Page 8, 9
to run job machine at end of
cycle
Problems? See Error Messages, page 35, and Troubleshooting , page 39
Job 8
2 folded sheets
(collated)
no envelope (fold only)
Two Collated, Folded Sheets,
No Envelope (Fold Only)