Seca 644 Series Скачать руководство пользователя страница 47

Страница: 47 / 59

106 •

4. If you do not wish to make any more settings, press

the Start key.
The settings will be saved.
The device switches off.

Selecting print option

(APrt)

You can configure the device so that the measurement
results are automatically printed out on a wireless
printer registered to the wireless group.

NOTE

This function is only accessible if a

seca wireless printer has been integrated in the

wireless group via the "Learn" function.

1. Switch on the device.
2. Select the "APrt" menu item from the "rF" submenu

and confirm your selection.

3. Select the setting relevant for your device

combination:

– HI: measurement results from length

measuring devices

– MA: measurement results from scales
– HI_MA: measurement results from length

measuring devices and scales

– Off: no automatic printing, printing only pos-

sible by pressing and holding the Enter key

during the weighing procedure.

4. Confirm your selection.

You exit the menu automatically.

5. If you do not wish to make any more settings, press

the Start key.
The settings will be saved.
The device switches off.

Setting the time (tIME)

You can configure the system so that the wireless
printer automatically adds a date and time to your
measurement results. To do this, you have to set date
and time once on this device and transmit it to the
internal clock of the wireless printer.

NOTE

This function is only accessible if a

seca wireless printer has been integrated in the

wireless group via the "Learn" function.

1. Switch on the device.

Содержание 644 Series




























































Результаты поиска

Содержание 644 Series

Отзывы:

Похожие инструкции для 644 Series

Бренды по названию

Популярные бренды

Seca 644 Series, Руководство пользователя

Результаты поиска

Содержание 644 Series

Отзывы:

Похожие инструкции для 644 Series

Бренды по названию

Популярные бренды