GB
SEC Electronics PKN10
V0.3
page 8
MicroSD card contents
PKN10.cfg
: configuration file, contents is described below. If
present, it is compared with device configuration in FLASH. In case
they are different, configuration from card is copied to FLASH.
That means this file (or micro SD card) shouldn’t be present if the
configuration is changed locally (with pushbutton). Changes will be
deleted at the next power up in this case.
PKN10firmware.bin
: file with a PKN10 firmware upgrade. It is
prepared from hex file with a PKN09make.exe software tool.
Firmware is changed only when this is requested in the local
configuration.
PKN10font.bin
: file with fonts and symbols. It is prepared from
monochrome bitmap fonts with the PKN09make.exe tool. It is
usually upgraded together with the firmware. The upgrade shall be
enabled in the local configuration.
BMP images
: PKN10 device checks bitmap image files on the SD
card at start-up, so that those images can be shown as a
screensaver, background, logo or a slide show. If an image has a
name input1.bmp, then these image will be shown if input 1 is
active and the same goes for input2,3,4.
Image format and name specification:
a)
Input1:
Name – “input1.bmp”
Format – BMP 320 x 240 16bit, RGB565
b)
Input2:
Name – “input2.bmp”
Format – BMP 320 x 240 16bit, RGB565
c)
Input3:
Name – “input3.bmp”
Format – BMP 320 x 240 16bit, RGB565
d)
Input4:
Name – “input4.bmp”
Format – BMP 320 x 240 16bit, RGB565
e)
Background:
Name – “background.bmp”
Format – BMP 320 x 240 16bit, RGB565
f)
Logo:
Name – “logo.bmp”
Format – BMP 220 x 60 16bit, RGB565
g)
Other images : Name – not significant
Format – BMP 320 x 240 16bit, RGB565
Wav files:
PKN10
device checks wav files on the SD card at start-
up, for the voice announcer. These files should have a specially
assigned name and format. Format can be 16kHz/8-bit mono or
standard CD format 44.1kHz/16-bit stereo.
Assigned names for wav files:
