6
3. Installation
Before starting up this product, please check for external damage. In case of visible external
damage we immediately dis-advise the start-up of this product! Please remove all packaging
material of this product before the first start-up.
1. Disconnect the mounting base by turning it counterclockwise from the case.
2. Hold the mounting base to this position on the ceiling, where you want to mount the smoke
alarm detector. Draw with a pencil the holes for the bores to the ceiling.
3. Then drill two holes (Ø 5mm).
4. Now take the two in the scope of delivery supplied dowels and put them in the bores.
5. Screw the mounting base to the ceiling. The screws are included in scope of delivery.
6. Finally take the smoke detector and turn the housing clockwise until it clicks on the mounting
base to the ceiling. The smoke alarm detector is now ready for use.
Attention:
The alarm is only ready for operation if the case is properly attached to the
mounting base. Otherwise the battery is deactivated and the smoke alarm is not ready for use.
1.
LED control lamp
2.
Speaker
3.
TEST-Button
