background image

Page 3

1. Do not leave vacuum while plugged in. Unplug from

outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not use near small children or pets. Do not allow

to be used as a toy. Use of this product by children
should always be supervised by an adult.

4. Use only as described in this manual. Use only

manufacturer-recommended attachments.

5. Do not use with a damaged cord or plug. If vacuum

is not working as it should, has been dropped,
damaged, left out-doors, or dropped into water, take
it to a SEBO service center.

6. Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp
edges or corners. Do not run vacuum over cord.
Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp

the plug – not the cord.

8. Do not plug in if switch is in the “I” (ON) position.

9. Do not use outlets above counters to plug in vacuum –

damage to items in the surrounding area could occur.

10. Always carry the vacuum over steps and sills.

11. Do not handle plug or vacuum handle with wet hands.

12. Do not put any object into vacuum openings. Do not use

machine with any openings blocked. Keep openings
free of lint, hair, and anything that may reduce air flow.

13. Do not re-use filter (dust) bags or wash the filters.

14. Do not remove any screws from vacuum.

15. Do not vacuum up anything that is burning or

smoking, such as cigarettes, matches, or hot ashes.

16. Do not use vacuum without dust bag and/or filters in

place.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

!

When using an electrical appliance, basic precautions must always be followed.

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other.
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Connect only to the outlet type specified on the serial number plate underneath the machine.

SAVE THESE INSTRUCTIONS.

WARNING:

To reduce the risk of fire, electric shock, or injury:

17. Turn off all machine controls before unplugging.

18. Use extra care when cleaning on stairs.

19. Do not use machine to vacuum up flammable or

combustible liquids such as gasoline or use in areas
where they may be present.

20. Machines can cause a fire when operated near

flammable vapors or materials. Do not operate this
vacuum near flammable fluids, dust or vapors.

21. Maintenance and repairs must be done by qualified

personnel.

22. Use only original SEBO replacement parts.

23. Do not use vacuum as a step.

24. If vacuum is used on plush carpet or carpet with thick

padding, do not leave machine standing in one place
with machine turned on.

25. Do not use the operator’s handle, which inserts into the

top of the dust bag housing, to carry the machine. The
carrying handle is located on the backside of the
machine’s bag housing.

26. Keep hair, loose clothing, fingers, and all parts of body

away from vacuum openings and moving parts. Do not
place fingers or other body parts under vacuum unless
it is unplugged.

27. Do not place the power head over rug or carpet edges.

28. The vacuum has a manual reset thermal protector. The

protector is reset by switching off the vacuum. The
thermal protector needs some time to cool down after
switching off! Check the vacuum for air blockages or
mechanical failures before switching on.

29. Store the vacuum in a dry place at room temperature.

When the vacuum is not in use, you should wrap the
cord on the cable hooks.

30. Any other servicing should be performed by an

authorized service representative.

Содержание essential G1















Отзывы: