9
TROUBLE-SHOOTING GUIDE
PROBLEM
Does not turn on
Red LED light is
illuminated and machine
shuts off
Does not pick up
REASON
1. Telescopic tube not inserted
properly.
2. Not plugged into good outlet.
3. Cable worn.
4. The power control slider switch
is set to “0” (“off” position).
5. The internal switch in the
swivel neck is off because the
machine is in the upright locked
position.
1. Bag full.
2. Clog in airflow pathway, attach-
ment hose, attachment tube or
entrance to dust bag.
3. Microfilter dirty.
4. Exhaust filter dirty.
5. Clog in floor pad, suction duct or
swivel neck
1. Hose/handle assembly not
correctly inserted.
2. The power control slider is set
to no suction setting.
3. Filter bag cover not closed.
SOLUTION
1. See your C3.1 or K3 owner’s
manual
2. Use another outlet.
3. Replace cable.
4. Slide the power control slider
switch to “on” position. In addition,
C3.1 and K3 users, make sure the
main power switch on the canister
is in the “on” position.
5. Release the foot pedal and
lower the handle to operating level.
See page 7.
1. Replace bag. See your vacuum
owner’s manual.
2. See Clog Removal in your vacuum
owner’s manual.
3. Replace microfilter. See your
vacuum owner’s manual.
4. Replace exhaust filter. See your
vacuum owner’s manual.
5. See page 8.
1. Reinsert hose/handle assembly
making sure that it is lined up
properly and is snapped into
place. See your vacuum owner’s
manual.
2. Slide the control to MAX setting.
See your vacuum owner’s manual.
3. See your vacuum owner’s manual.
Always unplug vacuum from outlet before dismantling any part of the machine!
!
Check your FELIX, C3.1 or K3 canister owner’s manual for more trouble-shooting problems and solutions.
All manuals and user guides at all-guides.com
