
manual of horse blanket drying rack
19
!
7.3 Connecting plugs
NOTE!
Check whether the voltage, indicated on the heating element, corresponds to the voltage of
the electrical point to which you want to connect.
Only use the drying rack in sockets provided with a protective earth switch.
Ensure that the cables do not hang over (sharp) edges, do not make any sharp bends, cannot be
towed and do not touch any hot surfaces. Keep cables outside the walking route.
Place the IEC plug (20) of the heating element in the contact found at the bottom of the switch block.
And finally, connect the power plug (21) to the mains socket.
Place the other plugs of the heating elements in the contacts found at the bottom of the switch block
(in line with the relevant drying rack).
Place the IEC plug (20) of the heating element in the contact found at the bottom of the switch block.
And finally, connect the power plug (21) to the mains socket.
SINGLE DRYING RACK
FOUR-FOLD DRYING RACK
21
18
20
20
20
18
18
18
18
20
21