EN
Setting up the telescope
Put the package on a save underground and open it carefully.
Get ALL boxes out of the package, because they are also on one another. Empty boxes are merely there to
ensure the transportation.
Put all components on a save and flat
underground, so that you can see them
properly. Be careful to not damage the lens
barrel and to not lose the small screws.
For the erection of the tripod we need
the following parts:
3 tripod legs, tripod mount, ocular shell,
3 screws with female screw, 3 screws
with butterfly nut, maybe 3 screws to
fixate the tripod (if they aren’t already
there).
At the tripod mount there are three
mountings. Take one tripod leg and
slide the upper connecting piece
carefully to the mounting of the tripod
mount. Ensure that the holes for the
screws are at the same spot. You
can simply take a look from the side
to see if the holes are aligned
fittingly.
