Seb
Art
professional line
Mig29 3D-EDF
ARF
ASSEMBLY MANUAL
The real plane
The MiG-29 is a
fourth-generation
jet fighter aircraft
designed in the
Soviet Union
for an
air superiority
role. Developed in the 1970s by the
Mikoyan
design bureau
, it entered service with the
Soviet Air Force
in
1983, and remains in use by the
Russian Air Force
as well as in many other
nations.
The MiG-29OVT “Red Star” version have thrust-vectoring engine and fly-
by-wire technology. It served as a thrust-vectoring engine test-bed and
technology demonstrator to show future improvement in the MiG-29
series. The two RD-133 thrust-vectoring engines, each features unique
rotating nozzles which can provide thrust vector deflection in all
directions. The OVT version is being demonstrated in various air shows
around the world for potential export and as an aerobatic demonstrator.
Specifications
:
Year Built: 1983
Primary Function:
fourth-generation
jet fighter aircraft
Length: 17.37 m (57 ft)
Wingspan: 11.4 m (37 ft 3 in)
Weight Empty: 11,000 kg (24,250 lb)
Max. Speed: 2.400 km/h ( 1,490 mph)
Engine: 2 ×
Klimov RD-33
afterburning
turbofans
, 8,300 kgf (18,300 lbf) each
Содержание Mig-29 3D EDF ARF
