3
Required radio, motor and battery
Radio equipment:
•
Minimum 4-channel radio system
•
4 digital standard servo, recommended JR PROPO DS9401 or DS8301
•
1 servo extension 600mm, for elevator servo
•
2 servo extension 100mm, for aileron’s servos
Recommended electric motor for best performance:
•
Hacker A50-16S + X70 SBec-Pro cont APC 16x10E
Recommended Li-Po battery pack for best performance:
•
Flight Power EVO 3300mAh 6S.….for unlimited 3D
•
Flight Power EVO 3700mAh 6S…..for duration and precision
Additional required item, tools and adhesives
Tools:
•
Drill
•
Drill bits: 1,5mm, 2mm, 3mm
•
Phillips screwdriver
•
Hobby knife
•
Sanding paper
•
Masking tape
•
Soldering iron
Adhesives:
•
thin CA
•
medium CA
Warning
This RC aircraft is not a toy!
If misused, it can cause serius bodily harm and damage to property.
Fly only in open areas, preferably in official flying sites, following all instructions included with
your radio and motor.
Before starting assembly
Before starting the assebly of your KatanaS 50E, remove each part from its bag and protection for a
prior inspection. Closely inspect the fuselage, wing panels, rudder, and stabilizer for damage. If you
find any damage or missing parts, contact the place of purchase.
If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use
caution while working around areas where the covering material overlap to prevent separating the
covers.
