sebaKMT Sebalog GT-3, Руководство пользователя

Страница: 25 / 46

Preparatory Work in the Office
25
Segment Parameters
GSM Transmission
Specify the days on which you would like the GSM modem of the
GSM transmitter to be active (known as
"GSM days"
).
It will only be possible to upload or send measured data or
messages on these days.
Segment Parameters
Wireless Settings
Specify the days and times per day that you would like the short-
distance wireless transmission module of the GSM transmitter to
be active (known as "Wireless days" ).
The GSM transmitter will only be able to communicate wirelessly
with other devices within these defined periods.
Please note: The "Wireless start time" set here is also set
automatically as the time at which the GSM transmitter requests
the previous night's measured data from the connected loggers
and forwards this data to the FTP server.
4.7 Performing a GSM test
In order to avoid on-site complications, an initial GSM test should be carried out in the
office on every GSM transmitter to be used for the measurement. This test checks
whether the device is able to establish a mobile wireless connection without error.
In order to carry out a GSM test using a computer, the following conditions must be met:
•
A wireless interface must be connected to the computer (e.g. LOG RI).
•
The GSM transmitter in question must be set up in the SDV-3 software.
•
The GSM transmitter in question must be ready for GSM operation. (SIM card
inserted, GSM transmitter programmed)
•
The GSM transmitter in question must be switched on and within the wireless range
of the computer.
In order to carry out a GSM test using a computer, proceed as follows:
Step Description
1
In the SDV-3 software, select the respective GSM transmitter in the directory tree.
2 Click on Check GSM in the Communication segment in the menu bar.
(If necessary, first open the GSM transmitter tab).
Result:
A new window will open.
(continued on the next page)
"GSM days"
"Wireless days"
Prerequisites
Procedure