6
7
5
4
4
5
3
3
1
2
2
1
5
1
5
6
STEP 6
Dissasemble the
Bottom Mount Bracket
.
COSMO™ SHOWER/TUB DOOR - MODEL NUMBER: SW0115, SW0215
STEP 3
STEP 4
STEP 5
Slide the
Adjustable Door Stoppers
onto each end of the
Door Rail
and
secure them temporarily using the hex wrench. The fixed end stopper position
should be between the two holes on
Door Rail
. The Sliding door-end stopper
position will be adjusted in a later step after the
Sliding Door
is installed.
Dissasemble the
Fixed Door Holder
.
Slide the
Door Rail Wall Connectors
onto each end of the
Door Rail.
Secure them temporarily using the hex wrenc
Place the
Fixed Door
onto pre-installed shower base, tub or threshold and
move the door to the wall.
4
Cylinder
Base Plate
1
Attach the
Fixed Door Holder’s
base plate to the
Door Rail
by inserting
it’s cylinder into the
Door Rail
, placing it right behind per-drilled hole and
fastening the base to the cylinder.
Base Plates
Cylinders
Attach the
Fixed Door
to the
Fixed Door Holders
by screwing back
the covers.
Note:
To move the
Fixed Door Holder
release the screw. Do not take screw out.
Attach
“U” Seal with Bulb Attachment
to the vertical edge of the
Fixed
Door
on the finished wall side.
STEP 7
