Seaward TYPE L PLUS Скачать руководство пользователя страница 9

Страница: 9 / 10

TYPE L PLUS

Operating Instructions

6.3

Ensure the new battery is firmly fitted into the internal
connector and with the right polarity.

6.4

Replace the battery cover and insert the retaining screw
taking care to avoid over tightening.

7.0

Maintenance

7.1

The Type L Plus is extremely robust but should always
be kept free from dust and any excessive temperature
variations avoided.

7.2

Ensure the Type L Plus is kept dry with no surface
moisture on either the body or the housing of the LCD
display.

7.3

The body of the Type L Plus should be regularly
inspected to ensure no deep scratches or physical
damage.

7.4

If any of the above conditions have been observed then
the Type L Plus must be appropriately secured to
prevent any further use.

8.0

Cleaning

8.1

Clean the external case of the Type L Plus with a clean
dry cloth.

8.2

Never apply lubricants to the pivot action of the Type L
Plus.

8.3

Avoid using solvents and abrasive scouring agents to
clean the external case of the Type L Plus.

8.3

Check the battery contacts and mounting compartment
within the Type L Plus are free of electrolytic
contamination.

8.4

Any contamination of the battery contacts or
compartment should be cleaned with a dry cloth.

Содержание TYPE L PLUS










