3)
WIND
(Wind Sensor ON/OFF)
Deactivation of the Wind Sensor
The device is supplied with the Wind Sensor enabled (WIND
ON LED).
The deactivation of the Wind Sensor can be carried out as fol-
lows: with the SEL key position yourself on the flashing of the
WIND LED and press the SET key for an instant: at the same
time, the WIND LED will switch off and the Wind Sensor deac-
tivation will be complete. It is possible to repeat the operation
to activate the Wind Sensor.
4)
SUN
(Sun Sensor ON/OFF)
Enabling the Sun Sensor
The device is supplied with the Sun Sensor disabled (SUN
OFF LED).
The enabling of the Sun Sensor can be carried out as follows:
with the SEL key position yourself on the flashing of the SUN
LED and press the SET key for an instant: at the same time,
the SUN LED will remain on and the Sun Sensor enabling will
be complete. It is possible to repeat the operation to disable
the Sun Sensor.
5)
RAIN
(Rain Sensor ON/OFF)
Deactivation of the Rain Sensor
The device is supplied with the Rain Sensor enabled (RAIN ON
LED).
The deactivation of the Rain Sensor can be carried out as fol-
lows: with the SEL key position yourself on the flashing of the
RAIN LED and press the SET key for an instant: at the same
time, the RAIN LED will switch off and the Rain Sensor deactiv-
ation will be complete. It is possible to repeat the operation to
activate the Rain Sensor.
6)
TEST
(Test Sensors ON/OFF)
The device is supplied with the Wind - Sun - Rain Test Sensors
disabled (TEST OFF LED).
The activation of the Wind - Sun - Rain Test Sensors can be
carried out as follows: with the SEL key position yourself on the
flashing of the TEST LED and press the SET key for an instant:
at the same time, the TEST LED will switch on and the activa-
tion of the Wind - Sun - Rain Test Sensors will be complete. It
is possible to repeat the operation to disable the Test Sensors.
Anemometer Test:
manually rotate the Anemometer blades
and, at the same time, the WIND MONITOR LED will switch
on, signalling the radio sending of the necessary information to
the previously configured coupled control unit (signalled by the
flickering of the CODE MONITOR LED), controlling the ascent
for 5 sec.
Sun Sensor Test:
rotate VR1 trimmer as far as possible clock-
wise (in + position) and, at the same time, the SUN MONITOR
LED will switch on, signalling the radio sending of the neces-
sary information to the previously configured coupled control
unit (signalled by the flickering of the CODE MONITOR LED),
controlling the descent for 5 sec. Rotate the VR1 trimmer VR1
anti-clockwise (in - position) and, at the same time, the SUN
MONITOR LED will switch off, signalling the radio sending of
the necessary information to the previously configured coupled
control unit (signalled by the flickering of the CODE MONITOR
LED), controlling the ascent for 5 sec.
Rain Sensor Test:
wet the sensitive part of the Rain Sensor
and, at the same time, the RAIN MONITOR LED will switch
on, signalling the radio sending of the necessary information to
the previously configured coupled control unit (signalled by the
flickering of the CODE MONITOR LED), controlling the ascent
for 5 sec.
Completed the test, ensure to have dried the sensitive part of
the rain sensor before using the control unit in the normal func-
tioning.
SENSORS MONITOR
The control unit presents four "monitor" indicator LED with
which it is possible to display the radio transmission of the in-
formation relating to each sensor.
---------------------- LEDS MONITOR -----------------
LED Reference LED Off LED On
CODE MONITOR Info = OFF Info = ON
WIND MONITOR Info = OFF Info = ON
SUN MONITOR Info = OFF Info = ON
RAIN MONITOR Info = OFF Info = ON
R
ESET
In case it is necessary to reset the control unit default factory
configuration, press the SEL and SET keys together so that all
indicator LED switch on and off at the same time.
2
Rev. 1.0 20/02/09
