Seat Tarraco 2020, Руководство пользователя

Страница: 131 / 424

Seats and headrests
● Press and hold the

button
›››
Fig. 115 .
●
Within the following 10 seconds, push the
open button

on the vehicle key. An audible
warning confirms the settings have been de-
activated.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.
●
Open the driver door and do not get into
the vehicle.
●
Operating the seat settings from outside
the vehicle.
●
Move the angle of the seat backrest com-
pletely forwards.
●
Release the control to set the angle and
then press again until an audible warning is
heard.
WARNING
Adjust the memory function only when the
vehicle is stationary.
Note
If the driver door is opened approx. 10 mi-
nutes after the vehicle was unlocked or lat-
er, the driver seat and the exterior mirrors
do not move automatically.
Access aid for the third row of seats
Fig. 116
Second row of seats:: access aid con-
trols.
The convenient entry function makes it easier
to access the third row of seats.
Folding down the backrest and moving the
second row seat
●
Remove any objects located in the footwell
of the second row of seats
›››
.
●
Pull the release lever
›››
Fig. 116 in the di-
rection of the arrow.
● Fold down the backrest of the seat and
move the seat forward.
●
Enter the vehicle or leave the vehicle care-
fully
›››
.
Folding down the second row backrest
●
Move the rear seat to its rearmost position.
●
Pull the lever
›››
Fig. 116 and push the back-
rest backwards until it is in a vertical position.
The entire seat folds down
›››
.
●
The rear seat must be correctly engaged
›››
.
WARNING
If the convenient entry function is used
negligently or without due care, this may
cause accidents and serious injury.
●
Never use the convenient entry function
when the vehicle is in motion.
●
Avoid trapping or damaging the seat belt
when folding the rear seats back.
●
When moving the backrests up and down,
keep your hands, fingers, feet and other
body parts out of the operating area of the
hinges and the locking mechanism of the
seats.
●
Mats or other objects can be caught in
the hinges of the seat backrests or the
seats themselves. This would cause the
backrests and benches not to lock correct-
ly when moving the seats to the vertical po-
sition.
»
129