38
Navigation
After starting navigation to the destination
Fig. 27 Standard repre-
sentation: route calcula-
tion.
After starting guided navigation, the route to the first destination will be cal-
culated.
The route is calculated based on the requirements selected in the menu
Route options
⇒
page 44.
Depending on the setup, upon starting guided navigation, 3
alternative
routes
⇒
Fig. 27
will be proposed. These 3 routes correspond to the route
options selected in this function: Quick, short and economical routes.
Route criteria: meaning
Blue route
: Economical route: it is calculated seeking a balance between
savings in terms of kilometres and time.
Red route
: Quickest route to the destination, although it involves diver-
sions.
Orange route
: Shortest route to the destination, although it requires more
time. The navigation route may include unusual route sections, e.g. dirt
roads.
●
Select the route desired by pressing on the map.
The criteria setup in the menu
Route options
will be modified accordingly.
If you do not select any route, navigation to the destination will begin after
approximately one minute depending on the settings in
Route options
.
Navigation instructions (spoken recommendations for driving)
After calculating the route, you will hear the first navigation instruction. Be-
fore turning you may hear up to 3 navigation instructions, for example:
“Turn left shortly”, “Turn left in 300 metres” and “Turn left now”.
●
Press the setup button to repeat the last navigation message.
The distances indicated largely depend on the type of road and the speed at
which you are driving. For example, on motorways the instructions are given
significantly earlier than in cities.
On roads with several lanes, on roads that divide and on roundabouts, the
corresponding navigation instructions will also be given, for example: “On
the roundabout, take the second exit”.
Upon reaching the destination, you will hear the indication that you have ar-
rived at your destination.
During
dynamic navigation to the destination
you will be informed of any
traffic incidents received. An additional announcement is given if the route
is recalculated due to traffic congestion. An announcement will be given
when sections of the route are excluded manually.
During an acoustic indication, you can modify the volume with the control
to define a minimum or maximum volume level. All following announce-
ments will then be made at this volume.
For other acoustic indication setups, see
Announcement setup
⇒
page 44.
