Seat Leon 2013, Руководство по ремонту

Страница: 259 / 279

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
26 – Exhaust system
1 Exhaust pipes/silencers
⇒ “1.1 Exploded view - silencers”, page 253
⇒ “1.2 Disconnecting exhaust pipes/silencers”, page 257
⇒ “1.3 Removing and installing silencers”, page 259
⇒ “1.4 Align exhaust system to be free of stress”, page 261
⇒ “1.5 Checking exhaust system for leaks:”, page 262
1.1 Exploded view - silencers
⇒ “1.1.1 Assembly overview - silencers, Leon SC 5 door model”,
page 253
⇒ “1.1.2 Assembly overview: silencer, Leon ST”, page 255
1.1.1 Assembly overview - silencers, Leon SC 5 door model
1 - Holder
❑ Replace if damaged
2 - Bolt
❑ 20 Nm
3 - Mounting »A«
❑ Replace if damaged
❑ Only for rear silencer
❑ Aligning
⇒ page 254
4 - Secondary silencer
❑ Combined in one unit
with centre silencer as
original equipment. Can
be renewed individually
for repair purposes
❑ Removing and installing
⇒ page 259
❑ Disconnecting exhaust
pipes/silencers
⇒ page 257
❑ Aligning exhaust sys‐
tem free of stress
⇒ page 261 .
5 - Clamp (rear)
❑ Align exhaust system so
it is free of stress before
tightening clamp
⇒ page 261
❑ Installation position
⇒ page 257
❑ Tighten bolted connec‐
tions evenly
6 - Nut
❑ 30 Nm
7 - Holder
❑ Replace if damaged
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1. Exhaust pipes/silencers
253