If and when
224
– Move the loop
in the direction of the arrow and remove the
cover
⇒
page 223, fig. 144
.
– Remove connector
⇒
page 223, fig. 145
by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Dipped beam and side lights
– Raise the bonnet.
– Remove the loop
⇒
fig. 146
in the direction of the arrow and
remove the cover.
– Remove the connector
⇒
fig. 147
from the bulb.
– Unclip the retainer spring
⇒
fig. 147
pressing inwards to the
right.
– Remove the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
A
1
A
2
Fig. 146 Dipped beam
headlights
Fig. 147 Dipped beam
headlights
A
1
A
2
A
3
IbizaST_EN.book Seite 224 Dienstag, 14. September 2010 1:31 13