Seat Exeo 2012, Руководство пользователя, Страница: 273 / 313

271 If and when
Remove the bulb holder
When changing a bulb, you must first remove the bulb hold-
er.
Fig. 208 Retaining tabs
on reverse side of tail
light
There are three securing tabs on the inside of the tail light.
–
Release the retaining tabs
⇒
fig. 208
A
.
– Take out the bulb holder.
–
Change the defective bulb
⇒
page 271
⇒
page 272.
WARNING
If a bulb is replaced in a tail light assembly with LED, do not pull too hard
on the bulb holder. This may damage the wiring of the LED module.

Changing bulbs
All bulbs can be changed easily in the bulb holder.
Fig. 209 Position of the
bulbs in the bulb holder.
Example: Left tail light in
side panel
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
–
Check whether the new bulb is working.
– Re-install the bulb holder
⇒
page 272.

Safety First Operating Instructions Practical Tips Technical Specifications