Seat Exeo 2012, Руководство пользователя, Страница: 204 / 313

202 Trailer towing
– Pull out the knob in direction
A
, hold and turn in direction
B
until the locking pin
2
engages and the release pin
3
moves
out visibly
⇒
.
Inserting the ball joint
– With the spring mechanism in the ready position, insert the ball
joint into the mounting fixture and push it upwards
⇒
fig. 156
in the direction indicated (arrow)
⇒
. It should lock into posi-
tion automatically. You should now clearly hear it click into
place.
– Lock the ball joint by turning the key to the green marking.
– Remove the key.
Cont
⇒
page 202, Fitting the ball joint (step 4).
WARNING
●
If it is not possible to set the spring mechanism to the ready position
as described above, do not use the ball joint. Please contact a qualified
workshop.
● To avoid injury, keep your hands away from the knob or cover piece
when inserting the ball joint in the mounting fixture. Otherwise, you
could be injured.

Fitting the ball joint (step 4)
Fig. 157 Removable tow-
ing bracket: Safety check
Fig. 158 Rear bumper:
Pulling down the power
socket
Safety check
– Check that the green marking
A
⇒
fig. 157 on the knob is in-
side the black zone marked on the ball joint.
