Seat Altea 2014, Руководство пользователя, Страница: 86 / 301

84 Cockpit
Tyre pressure adjustment
Following the modification to tyre pressure or after changing one or more
wheels, the button
⇒
Fig. 50 must be kept pressed while the ignition is on
until an audible warning is heard and the warning lamp goes out.
If the wheels are under excessive load (for example, driving with a trailer or
heavy load), the tyre pressure must be increased to the recommended value
for a full load (see the sticker on the inside of the fuel flap). If the tyre moni-
tor system button is pressed down, the new tyre pressures are confirmed.
The tyre pressure control lamp

lights up
If the tyre pressure of one or more wheels is much lower than the value set
by the driver, the tyre control warning lamp lights up
⇒
.
The tyre pressure control lamp

flashes
If the tyre pressure control lamp flashes, this indicates a fault. Go to the
nearest specialised workshop.
WARNING
●
When the tyre pressure control lamp lights up, reduce speed immedi-
ately and avoid any sudden manoeuvre or braking. Stop when possible,
and check the tyre pressure and status.
● The driver is responsible for maintaining correct tyre pressures. For
this reason, tyre pressure must be regularly checked.
● Under certain circumstances (for example, when driving in a sports-
like manner, in winter conditions or on a dirt track) the tyre control lamp
may light up or function incorrectly.
Note
If the battery is disconnected, the yellow warning lamp

lights up after
turning the ignition on. This should turn off after a brief journey.

Bulb defect

The warning lamp lights up when a bulb in the vehicle's ex-
terior lighting is defective.
The warning lamp

lights up when a bulb in the vehicle's exterior lighting
(e.g. left-hand main beam) is defective.
The instrument panel displays the following message
1)
:
LEFT FULL BEAM
FAULTY
.

Brake system*

This warning lamp lights up if the brake fluid level is too low
or if there is a fault in the system.
This warning lamp

lights up if
● the brake fluid level is too low
⇒
page 234.
The instrument panel displays the following message
1)
: STOP BRAKE FLUID
INSTRUCTION MANUAL .
● there is a fault in the brake system.
The instrument panel displays the following message
1)
:
BRAKE SYSTEM
FAULT INSTRUCTION MANUAL
.
This warning lamp can light up together with the ABS system warning lamp. 
1)
Depending on the version of the model.